New GTA Project

A place to showcase your pride and joy

Moderators: eastlmark, BIG_MVS, Test Moderator

User avatar
User

Tony Smith

Rank

Non Member

Posts

1407

Joined

Fri Apr 16, 2004 4:50 pm

Location

Kent


Has thanked: 0 time
Been thanked: 19 times

New GTA Project

Postby Tony Smith » Thu Jan 05, 2017 7:50 pm

Bought another cheap GTA (Project - Glutton for Punishment?) for a third project. Good solid car but been unused for a fair while and paint is awful. On the upside not really any major corrosion spotted so far and headlamp lamps are good.

So after my Safrane Biturbo engined GTA

Image

and my 2.9 injection GTA

Image

it was a question of what to do next?

Image
Alpines - GTA 3.0 Turbo, GTA 3.0 Inj (Project DD), GTA 6.2 V8 (500 bhp) , R32 Skyline GTR, BMW Alpina B10 635 Highline, Alpina B10 E39 5 Series, Jaguar 4.2 XKR, Laguna 205GT, BMW 120d.
User avatar
User

BIG_MVS

Rank

Club Member

Club Member
Posts

5097

Joined

Wed Jun 30, 2004 9:12 am

Location

Sandbach


Has thanked: 38 times
Been thanked: 72 times

Re: New GTA Project

Postby BIG_MVS » Thu Jan 05, 2017 9:23 pm

There is only one engine I would put in, and that has two extra pots....
1994 A610 - Montana Red (For Sale)
User avatar
User

simontaylor

Rank

Non Member

Posts

5602

Joined

Thu Apr 15, 2004 12:33 pm

Location

Fleet, Hampshire


Has thanked: 44 times
Been thanked: 56 times

Re: New GTA Project

Postby simontaylor » Fri Jan 06, 2017 9:59 am

V8 Quad Cam
1UZFE
and reliable.
1986 : '86 GTA v6 BW-EFR turbo, with Adaptronic ECU
Firsts at
2007 : Gurston Down & RAOC Champion
2008 : Rushmoor & Eelmoor & ACSMC Hillclimb class Champion
2009 : Longcross & Eelmoor
2010 : Crystal Palace & Eelmoor
2016 : Rushmoor & 5th O/A
User avatar
User

mettersl

Rank

Club Member

Club Member
Posts

2027

Joined

Sat Nov 13, 2004 12:46 pm

Location

Saffron Walden- North Essex


Has thanked: 23 times
Been thanked: 59 times

Re: New GTA Project

Postby mettersl » Fri Jan 06, 2017 9:09 pm

As long as it's not a rover v8 (less power than the prv, usually) or its steel block buick sisters.....all that weight would make the handling....more interesting.
A 90 degree v8 should be a neat install as the height could be quite close to the PRV. Gearbox and torque are words that would worry me, A610 was a challenge for th UN1....lotus v8 used to kill them.
Reliability kit for the gearbox is expensive as I know you know....but then a custom bell housing won't be free either.
Will be an interesting build.
User avatar
User

Tony Smith

Rank

Non Member

Posts

1407

Joined

Fri Apr 16, 2004 4:50 pm

Location

Kent


Has thanked: 0 time
Been thanked: 19 times

Re: New GTA Project

Postby Tony Smith » Sat Jan 07, 2017 7:45 pm

It will be V8 but Chevy LS3. All aluminium, weight virtually identical to a PRV with a turbo bolted on. Plan is to be fully trimmed road car sans rear seats which will have a R26R style cage. Uprated everything, exploring some gearbox tweeks to save buying £2500 of bits to strengthen it. Bolt in driveshafts. I've talking to a few people and they reckon if your sensible and avoid using all the torque in 5th the boxes will take high 300 ft/lbs. I have a few spare ones. Going to wrap in Rothmans Europa Cup colours. Very probably sit on A610 turbines.
Image
Alpines - GTA 3.0 Turbo, GTA 3.0 Inj (Project DD), GTA 6.2 V8 (500 bhp) , R32 Skyline GTR, BMW Alpina B10 635 Highline, Alpina B10 E39 5 Series, Jaguar 4.2 XKR, Laguna 205GT, BMW 120d.
no avatar
User

Custard

Rank

Non Member

Posts

790

Joined

Sat Oct 12, 2013 7:02 pm


Has thanked: 1 time
Been thanked: 35 times

Re: New GTA Project

Postby Custard » Sat Jan 07, 2017 7:54 pm

As the Yanks have always said you can't beat cubic inches.
User avatar
User

clee

Rank

Non Member

Posts

10431

Joined

Fri May 28, 2004 11:58 am

Location

Derbyshire


Has thanked: 54 times
Been thanked: 104 times

Re: New GTA Project

Postby clee » Sat Jan 07, 2017 8:25 pm

yes ...yes you can :sarcasm
Image
no avatar
User

Custard

Rank

Non Member

Posts

790

Joined

Sat Oct 12, 2013 7:02 pm


Has thanked: 1 time
Been thanked: 35 times

Re: New GTA Project

Postby Custard » Sat Jan 07, 2017 9:00 pm

No you cannot linear power all the way from tick over, have been thinking of building one but decided the gearbox would not do the torque low down but you could probably manage that through the Ecu limiting it. Well any gear wheel spinning plus the sound! may be I will, it would be an animal no I would not have a license within a week. :crazy
User avatar
User

darrenbiggs

Rank

Non Member

Posts

1499

Joined

Thu Apr 29, 2004 1:03 pm

Location

Horley - Nr Gatwick


Has thanked: 15 times
Been thanked: 39 times

Re: New GTA Project

Postby darrenbiggs » Sun Jan 08, 2017 7:33 pm

Don't forget that the less weight you have then the less problem you have that the torque will damage the gearbox or driveshafts. It needs something to act against after all, so less weight can only be a good thing.
I'm just here for the gasoline.
no avatar
User

Alpineandy

Rank

Club Member

Club Member
Posts

2381

Joined

Mon Jun 14, 2004 8:37 am

Location

North Essex


Has thanked: 5 times
Been thanked: 10 times

Re: New GTA Project

Postby Alpineandy » Tue Jan 10, 2017 3:39 pm

Custard wrote:No you cannot linear power all the way from tick over,

I think that porker is an LS3 and 2 turbos so the 1200bhp is quite well spread across the range (or that may be a different car).
Alpine A110, Renault Safrane 2.5dt, Hudson Kindred Spirit (Renault powered), transAlp (Honda) and Ducati Multistrada
User avatar
User

r5gordini

Rank

Non Member

Posts

267

Joined

Wed Nov 18, 2015 5:13 pm


Has thanked: 2 times
Been thanked: 10 times

Re: New GTA Project

Postby r5gordini » Tue Jan 10, 2017 5:45 pm

Wow! That'll be incredible. FYI - I am planning to use LS1 coils on my A610.
no avatar
User

Custard

Rank

Non Member

Posts

790

Joined

Sat Oct 12, 2013 7:02 pm


Has thanked: 1 time
Been thanked: 35 times

Re: New GTA Project

Postby Custard » Tue Jan 10, 2017 6:01 pm

You cannot beat a v8 the sound track the torque very addictive, the down side the GAS mileage back in the 80s I lived on the Texas panhandle, we built a pick up using an old race hemi engine with a quick shift autobox absolutely amazing every time it change gear you could not stop your head hitting the back window. Twin saddle Tank's 20 gallon you would get through in 2hrs plus tyres, the induction noise is imprinted on my brain. :crazy
User avatar
User

paulrob100

Rank

Non Member

Posts

383

Joined

Sat May 02, 2015 9:20 pm

Location

Nottingham


Has thanked: 6 times
Been thanked: 12 times

Re: New GTA Project

Postby paulrob100 » Tue Jan 10, 2017 8:17 pm

Gas Monkey put a turbo LS3 into a 911. Seemed sacrilege, but it worked.

https://youtu.be/csPOQUlNb5c
La Plastique Fantastique :GTA
User avatar
User

Tony Smith

Rank

Non Member

Posts

1407

Joined

Fri Apr 16, 2004 4:50 pm

Location

Kent


Has thanked: 0 time
Been thanked: 19 times

Re: New GTA Project

Postby Tony Smith » Thu Jan 19, 2017 7:51 pm

It's proving really hard for me to update this thread as about 80% of the time I get an error message and the message disappears so for anybody interested follow this link.

http://turborenault.co.uk/t74538/#post-565257
Alpines - GTA 3.0 Turbo, GTA 3.0 Inj (Project DD), GTA 6.2 V8 (500 bhp) , R32 Skyline GTR, BMW Alpina B10 635 Highline, Alpina B10 E39 5 Series, Jaguar 4.2 XKR, Laguna 205GT, BMW 120d.
User avatar
User

stephendell

Rank

Club Member

Club Member
Posts

7463

Joined

Wed Apr 14, 2004 7:25 pm

Location

London


Has thanked: 125 times
Been thanked: 102 times

Re: New GTA Project

Postby stephendell » Sat Jan 21, 2017 12:59 am

You can only read the first post on turbo renault unless you are a member.

Vince can you please try and sort out Tony's posting issues so he can put the build thread on here?
Trafic, Twingo GT, Vel Satis Turbo x 2, Clio V6 Proto Ph2, Vel Satis 3.5, Avantime, Alpine A610, GTA Atmo x 3, GTA Turbo x 3, R5 Gordini Turbo Mid Engine, Alpine A310 4cyl, Alpine A110, Yellow Smart
Next


  • Advertisement

Who is online

Users browsing this forum: No registered users and 26 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France